Rocatex FGS Ultimate WHITE Silicone - 310ml
100% Pure silicone with a high quality matt finish
Anti-fungal - Protects against mould, mildew and bacteria
Non-staining formula - suitable for natural stone and marble
Easy to tool and highly flexible - Movement capability up to 50%
Excellent adhesion to most surfaces - Plastics, tiles, paint, glass, metals
Outstanding UV resistance - Anti-aging and weather resistant
Advance low odour formulation
Available colours:
White
Jasmine
Limestone
Beige
Grey beige
Light grey
Dark grey
Anthracite
Translucent
Please note:
Colour matched Rocatex flexible grouts are available
An advanced low modulus, neutral curing, non-staining, matt finish, anti-mould, pure silicone sealant and adhesive. Suitable for bathrooms, kitchens, wetrooms, natural stone & marble, tiling, plumbing, sanitary, expansion joints, glazing, construction and roofing. Suitable for interior and exterior applications.
APPLICATION
Surfaces must be dry, firm, free from all loose material and contaminants such as dirt, dust, grease etc. Porous substrates must be primed. Apply the sealant firmly into or along the joint. Joint dimensions should be at least 5 x 5mm for indoor and 10 x 8mm (w x d) for outdoor applications. With increasing joint width (up to 30mm), joint depth should be roughly half the joint width. The sealant should be smoothed using a suitable tool and water or non-staining water-based smoothing agent. Working time is approximately 30 minutes (15 minutes for translucent). Do not apply in temperatures below 5°C or above 35°C. ROCATEX FGS Ultimate Silicone must not be used in aquarium construction, as a mirror adhesive or for underwater applications. Not suitable for plastics with generally poor adhesion to silicones (e.g. PE, PP, PET).
YIELD
Metres of joint per 310ml cartridge for the following joint dimensions:
5 x 5mm approx. 12m
10 x 10mm approx. 3m
STORAGE
Store unopened, clear of the ground, in a cool, dry, frost free environment.
CURING
Rate of curing depends on temperature, humidity and depth of substrate. The data given refer to tests at standard conditions (23°C / 50% relative humidity). Under these conditions, a 10 x 10mm joint will cure in 8 to 14 days. Low temperature, low humidity and joint depth above 15mm will retard skin formation and curing significantly. Data given were determined shortly after production, and may slightly vary with increasing age of product and for different colours. They are not meant for specification purposes.
DECLARED PERFORMANCE
