ROCATEX GROUT & CEMENT REMOVER - 1 LITRE

SKU:
TLTA-20-2026
£21.99
(Inc. Tax)
£18.32
(Ex. Tax)
(No reviews yet) Write a Review

Rocatex Grout & Cement Remover - 1 litre

A rapid action cleaning agent for removing cement residues, grout stain, efflorescence and other similar deposits from glazed and unglazed ceramics, slate, quarry tiles, brick, terracotta and stone.

Ceramics / Porcelain
Slate / Stone
Terracotta / Quarry Tiles
Brick / Paving
Cement Stain Remover
Limescale Remover
Efflorescence Remover
Interior / Exterior

A rapid action cleaning agent for removing cement residues, grout stain, efflorescence and other similar deposits from glazed and unglazed ceramics, slate, quarry tiles, brick, terracotta and stone. May be used in dilute or concentrated form. Suitable for interior and exterior applications.

DIRECTION

In mild cases and on absorbent tiles: Dilute 1 part ROCATEX Grout & Cement Remover in 4 parts warm water. Apply with a cloth or sponge wrung out in the solution. Wipe off thoroughly with a clean damp cloth. In more severe cases: Dilute 1 part ROCATEX Grout & Cement Remover in 1 part warm water. Apply liberally and spread over surface of tiles. If necessary, agitate with a scrubbing brush and leave to react for 5-10 minutes, keeping wet with additional ROCATEX Grout & Cement Remover solution. Mop up and rinse thoroughly with clean water. In extremely severe cases: Use undiluted and agitate with scrubbing brush or mechanical scrubber if necessary. Neutralise treated surface with clean water after use.

PLEASE NOTE

This product may not be suitable for use on all floor materials. Test the solution on a small inconspicuous area prior to general application. When using acid solution, prolonged contact with grout joints should be avoided. Any acidity remaining on surfaces treated with this product should be completely neutralised after use. This may be done with a little clean water applied by sponge. Unless you fully understand the methods of application, DO NOT use ROCATEX Grout & Cement Remover on surfaces that are calcareous, sensitive to acids (e.g. stainless steel, chrome, enamel etc), or contain lime (i.e. marble or limestone). In conditions of extreme humidity ROCATEX Grout & Cement Remover vapour may react with acid sensitive surfaces. Any contaminated surface should be rinsed off immediately with plenty of clean water.

COVERAGE

Approximately 5-25m2 per litre.

STORAGE

Store in a cool, dry, frost free environment.

HEALTH & SAFETY

Contains: Hydrochloric acid

Product PDF:
https://862696.app.netsuite.com/core/media/media.nl?id=1717180&c=862696&h=uvuOJSrFqc6k4BzS5k2n7x1NvCq9Gs0deCzDp6rKaZuRdWfa&_xt=.pdf
Product PDF label:
INSTALLATION INSTRUCTIONS (PDF)