Floors in bathrooms and shower areas will get wet. On unprotected timber floors this can create problems if the grout fails or cracks, as this can lead to tiles lifting if water seeps through to the timber floor causing it to swell and warp.
The eZheat wetroom solution eliminates this problem by allowing you to create a fully waterproofed floor. The trays are also totally compatible with electric underfloor heating which can be found in our store.
The eZheat Shower Trays contain the following items
- Shower Tray
- 2% Gradient Fall to Drain
- Easy & Quick to Install
- Lightweight & Sturdy
- Drain (Flowrate: 31L to 35L/min depending on grate)
- Tanking Kit (If Selected)
These lightweight shower trays are ideal if you’re looking to create a stylish yet effective wetroom. The eZheat shower tray allows you to create a waterproof wet room or walk in shower without having to use the traditional “step-in” acrylic tray. The shower tray gives the installer complete flexability of building their own wet room with a fully tilable shower tray to suit the rest of your bathroom or en-suite.
The shower trays removes many of the problems with Damp Penetration especially with timber floors and also descreases heat loss figures due to it’s thermal insulation, this is also the case on solid screed floors but instead stops the heat from dispursing into the screed.
The eZheat Tanking Kit which comes with the Shower Tray (If Selected) which creates a waterproof seal to create the wet room.
The Tanking Kit Contains
- Self Priming Waterproofing Paste (Covers 6.5m2)
- 10m Waterproof Membrane Tape
- 1 Internal Corner
- 300ML Silicone Sealant
- Gloves & Brush
