Wet Room Shower Tray Former Tile On Kit - Split Tray - Offset Drain Position

Floors in bathrooms and shower areas will get wet. On unprotected timber floors, this can create problems if the grout fails or cracks, as this can lead to tiles lifting if water seeps through to the timber floor causing it to swell and warp.

The eZheat wetroom solution eliminates this problem by allowing you to create a fully waterproofed floor.

The trays are totally compatible with electrical underfloor heating.

These shower trays are split in half to help with getting the shower tray into awkward locations or for areas that may be difficult to get a large shower tray into. Please ensure you seal the centre of the tray when installing.

The eZheat Shower Trays contain the following items:

• Shower Tray
• 2% Gradient Fall to Drain
• Easy & Quick to Install
• Lightweight & Sturdy
• Vertical Drain
• Tanking Kit (If Selected)

These lightweight shower trays are ideal if you’re looking to create a stylish yet effective wetroom.

The eZheat shower tray allows you to create a waterproof wet room or walk-in shower without having to use the traditional “step-in” acrylic tray. The shower tray gives the installer complete flexibility of building their own wet room with a fully tileable shower tray to suit the rest of your bathroom or en-suite.

The shower trays remove many of the problems with Damp Penetration especially with timber floors and also decrease heat loss figures due to their thermal insulation, this is also the case on solid screed floors but instead stops the heat from dispersing into the screed.

The eZheat Tanking Kit which comes with the Shower Tray (If Selected) creates a waterproof seal to create a wet room.

The Tanking Kit Contains:

• Self Priming Waterproofing Paste (Covers 6.5m2)
• 10m Waterproof Membrane Tape
• 1 Internal Corner
• 300ML Silicone Sealant
• Gloves & Brush

The eZheat shower tray is the ideal product to be used with our 6mm or 10mm Tile Backerboards. (Please check our store for prices)