Out of stock
The eZheat Manual Thermostat that is ultra compact, provides precise control and is easily configured to control the temperature of electric or water Underfloor Heating Systems.
Full Specification
Manual thermostat for heating systems
1No. remote floor sensor
2No. fixing screws
1No. Installation Manual
Features
2-pole safety power switch, On/off control output for heating device
Shut down output when heating over limitation for protecting the wooden floor
Technical data
Voltage: AC100- 240V 50/60Hz
Power Consumption: 5W
Power load: 16A*
Limitation range: 25°c~55°c
Switching differential: ±1°c
Ambient temperature: -5~40°c
Protective housing: IP20
Housing material: Anti-flammable PC
Floor sensor: Thermoplastic 10K NTC sensor, cable length is 3m
Dimension: 86mm X 86mm X16mm flush mount
Certification: CE
* - The thermostat is rated at 16Amp but to ensure you get maximum life from the thermostat, we recommend that you use loads that do not exceed 12.8 Amps. The relay within the thermostat is rated in accordance with the eequirements of EN 61810-1:2004 and EN60730-1 which are not representative of 'real life' applications but an arbitrary test method. The lifecycle of the relay contacts within the thermostat are affected by the power loading.If the load does not exceed 12.8Amps then the contact life is extended by more than double when compared with loads of 16 Amp.
